The impact of atmospheric pollution on outdoor cultural heritage: an analytic methodology for the characterization of the carbonaceous fraction in black crusts present on stone surfaces.

COVID-19 has reduced tourism in both museums and historical sites with negative economic effect. The wellbeing and good preservation of monuments is a key factor to encourage again tourism. Historical monuments exposed to outdoor pollution are subjected to well known degradation phenomenon including the formation on their surface of black crusts (BCs) causing blackening and deterioration of the monuments and, as a consequence, a worst fruition by the visitors. The aim of this research is the development and validation of a novel method to characterize and quantify the various components present in the black crusts. SO2 together with the carbonaceous fraction (i.e. OC, organic carbon, and EC, elemental carbon) represent the main atmospheric pollutants involved in the process of BCs formation which consists in the partial transformation of the carbonate substrate into gypsum where black particles are embedded. A new methodology based on the use of TGA/DSC (Thermogravimetric Analysis/Differential scanning calorimetry) and CHN (Carbon, Hydrogen, Nitrogen) analysis was set up allowing to determine organic carbon and elemental carbon together with other components such as gypsum. Four standard mixtures simulating BCs composition were prepared and analysed by the set-up methodology. The new procedure was subsequently applied to study real BCs samples taken from monuments and historical buildings placed in cities heavily affected by atmospheric pollution and by PCA (principal component analysis) their main features, from the point of view of carbonaceous fraction, were highlighted.

Improving indoor air quality through an air purifier able to reduce aerosol particulate matter (PM) and volatile organic compounds (VOCs): Experimental results.

The adverse effects of fine particulate matter (PM) and many volatile organic compounds (VOCs) on human health are well known. Fine particles are, in fact, those most capable of penetrating in depth into the respiratory system. People spend most of their time indoors where concentrations of some pollutants are sometimes higher than outdoors. Therefore, there is the need to ensure a healthy indoor environment and for this purpose the use of an air purifier can be a valuable aid especially now since it was demonstrated that indoor air quality has a high impact on spreading of viral infections such as that due to SARS-COVID19. In this study, we tested a commercial system that can be used as an air purifier. In particular it was verified its efficiency in reducing concentrations of PM10 (particles with aerodynamic diameter less than 10 µm), PM2.5 (particles with aerodynamic diameter less than 2.5 µm), PM1 (particles with aerodynamic diameter less than 1 µm), and particles number in the range 0.3 µm-10 µm. Furthermore, its capacity in reducing VOCs concentration was also checked. PM measurements were carried out by means of a portable optical particle counter (OPC) instrument simulating the working conditions typical of a household environment. In particular we showed that the tested air purifier significantly reduced both PM10 and PM2.5 by 16.8 and 7.25 times respectively that corresponds to a reduction of about 90% and 80%. A clear reduction of VOCs concentrations was also observed since a decrease of over 50% of these gaseous substances was achieved.